 
|
|
What
are Fiber Bed Filters?
 When
extremely small particles are present, the energy required
for scrubbing may increase tremendously. If the particles
are oil, liquid aerosol such as acid mist, a soluble salt,
or similar substances, a fiber bed may be the answer.
The principal of operation involves passing the particulate
laden gas stream at a low velocity through highly compressed
fiberglass matting. The result is the removal of particles
below 1 micron. The lower the velocity, the better the performance.
Gas normally enters at the bottom of the vessel and passes
upward through the special filters. The captured mist, plasticizer
or other liquid drains from the filter surface by gravity.
|
|
Important
points:
- All
performance levels are guaranteed
- Complete
engineering service is available including sizing
of the fiber bed mist eliminator units as well as
coordinated packages with other equipment.
- Construction
material, selected to minimize cost include: Carbon
or stainless steel,
PVC, Fiberglass or others as required
|
Complete
turnkey systems include:
-
Prescrubber
- Fiberglass
mist eliminator vessel
- All
interconnecting ducts
-
All controls
-
Preconditioners or liners as necessary
|
For
more information on these products please contact
us or call
us
at
(732)-736-6880
for a
consultation.
|
|
|
|
|
Copyright
© 2002 Air Process Systems, L.L.C.
| | |
